Laboratory Fume Hood Stations by SUNIL BROTHERS are available in various sizes and dimensions to meet specific requirements of your research. These fume hoods have a choice of vertical or horizontal sliding sash and MS or stainless steel construction. The standard sizes of our fume hoods are available in most demanded requirements (3ft ,4ft, 5 ft, 6 ft & 8 ft).
Often known as chemical fume hood, these systems also dilute effect on flammable gases and vapors. Our product range includes general purpose fume hoods, ductless fume hoods, and mobile units; designed with number of optional features and specifications required to meet critical challenges in laboratory research areas worldwide.
|Durable and chemical-resistant construction
|High performance centrifugal blower
|Powder Coated Mild Steel / Stainless Steel MOC
|Double wall construction
|Easy to clean surfaces
|Vertical or horizontal sliding sash
|Efficient fluorescent lighting
|Energy saving blowers
|CE & ISO certified
Construction: Our fume hood cabinets come with double wall construction made of Wooden /Epoxy Coated Mild Steel/ Stainless Steel as required by customer. It is ensured that the exterior is matched with the base unit. The inner walls and baffles are made of molded reinforced thermoset epoxy resins that meet or exceed NFPA 45 standard on Fire protection for laboratories using chemicals. The jambs are radiuses and aerodynamically designed to reduce the turbulence as the air enters the hood.
Our standard models are generally equipped with vertical sashes but as required horizontal sashes can be fixed. Tempered safety glass is used as standard.
Controls: Equipped with easy to use controls which are fixed outside the working area in order to provide convenient working environment. These units have start / stop switches for whole the unit and a light on / off switch.
Lighting: Supplied with fluorescent bulb shielded from the hood interior by laminated safety glass or tempered glass panel. The bulb is operated by a on / off switch and bulb changing process is done from the hood exterior without major disassembly of the unit.
Equipped with highly reliable audio / visual alarm device capable enough of detecting a drop or rise in airflow (no static pressure) through the hood unit. If the hood exhausts volume falls below a preset exhaust level, the alarm will alert the operator by sound and visual sign. The monitor also uses dual thermistor or dual diode sensing system to measure the velocity. The sensor is mounted in a flow tube placed on either side wall or front face of the fume hood. Local Audible and visual alarms have capabilities for remote monitoring hook up. These systems are designed in both ducted and ductless pattern.
Fume Hood Specifications
|CRCA 18G Epoxy Powder Coated
|M.S Pipe (18G) Powder coated
|Working Table Top
|M.S Powder Coated Sheet Covered with P.P Sheet
|Motor Blower Assembly Covered with G.I Sheet
|Door / Sash
|toughen glass, 5mm thickness,
|Air needed to replace the air exhausted from a room by the fume hood and other ventilation devices.
|The velocity of the air passing through the work opening of the fume hood measured in the plane of the sash. Measured in feet per minute (fpm), or liters per minute.
|Electrical Sockets & MCB Switch
|Fluorescent Lamp or UV Lamp
|– HEPA Filter
– Caster wheels
– Horizontal sash
– SS 314 / SS 316 MOC
– Temperature indicator
– Face Velocity Meter
– Airflow Indicator
– Audio / Visual alarm
|220 / 230 Volts
Types of Fume Hoods:
|Air Foil Fume Hood
|Flat Front Fume Hood
|Thin Wall Fume Hood
|Walk-In Fume Hood
|Demonstration Fume Hood
|Double-Sided Fume Hood
|Perchloric Fume Hood
|Radio Isotope Fume Hood
|Benchtop Fume Hood